Windows and doors, like the human body and automobiles, require regular maintenance. Adopting proper methods to maintain aluminum windows and doors not only extends their service life, but more importantly, improves their safe use and prevents them from loosening. Avoid falling door frames or glass and injuring yourself or others. Therefore, what measures should we take to maintain aluminum doors in daily life! Windows Here are some convenient and feasible maintenance tips for your reference only.
1. Glass cleaning
(1) If it is only dusty and accessible, wipe it with a damp towel. Wet the towel with water and wring it out. Wipe the front and back of the glass separately. If the glass is stained, change the water again. Wipe again.
(2) In the case of a tall building, it is best to use a glass wiper so that a person can stand on the ground. If the backside is inaccessible, have it cleaned by a professional cleaner. Be careful not to stick your body out of the window;
(3) Can be wiped with used newspaper. Repeatedly wiping with newspaper will quickly remove dust and other stains and make the glass look brighter, as if it were brand new.
(4) Leftover beer can also be used to wipe the glass;
(5) Slightly heat cooking vinegar and dip a towel into it to clean the glass;
(7) You can dip a toothbrush into toothpaste to deal with stubborn stains and then wipe it with a towel. Avoid using cleaning ball as it may leave marks on the glass surface and affect the appearance;
Take a basin of water and evenly add a little detergent, washing powder and other neutral detergents, then wipe with a soft towel and then with water to avoid air bubbles. Do not use strong acid or alkaline detergent, otherwise it will corrode the glass surface;
2. Cleaning the door frame
Usually, wipe with a damp towel or you can use the whitening effect of toothpaste. Scrub with a toothbrush dipped in toothpaste to brighten the door frame. For special stains, such as pen marks and paint marks, you can dip the rubber into water and wipe it, or use hot vinegar, or even dip it in turpentine, which can make aluminum windows and doors achieve a good cleaning effect.
3.Clean the slide groove
In the process of use, it is often found that aluminum doors and windows can not be opened or pulled. At this time, please do not force push and pull, so as not to damage the doors and windows due to excessive force. Pay attention to whether the doors and windows have sliding grooves. Foreign matter can be removed by the following methods, which may be dust buildup, stone sand left over from the decorating process or debris floating in the outdoor air.
(1) Since the sliding grooves of aluminum doors and windows are narrow and deep, a person's hand cannot reach in. You can wipe it with a wet cloth first, then pick up the wet cloth with chopsticks and other small objects and shuttle it back and forth. in the grooves. The dust inside is absorbed by the wet cloth and stretches out.
(2) For stubborn and dry sand, please use a small tool to shovel first, take care not to scratch the inner groove of the aluminum doors and windows, then use a vacuum cleaner to suck back and forth (remove the vacuum cleaner and compare it with the easy-to-use straw), and then finally wipe with a wet towel a few times to remove dust and impurities things are cleaned so there is no remaining armor.
4.Maintenance
In normal use, in addition to keeping the surface of aluminum doors and windows clean, you must also pay attention to other aspects of the use of safety, if you find the doors and windows are difficult to push and pull, please try to gently open and close , loose door frames, glass damage, etc., you should take timely remedial measures, take measures to avoid safety hazards and affect the performance. Please pay attention to the following points:
(1) Check whether the sealing strip of aluminum doors and windows is loose or aging, and replace it in time if necessary, otherwise it will cause rainwater infiltration and reduce its sealing performance and heat preservation effect;
(2) Please pay attention to whether the connectors and hardware fittings of each part of aluminum doors and windows are complete, whether the door stopper is loose, and whether the screws are rusty or lost (if any), please tighten them with a screwdriver in time. Replace it directly, otherwise it is easy to cause the door and window to slip. Causing damage to doors and windows;
(3) If you find that the slide of the door or window is uneven, you can put a few drops of oil in the slide groove, or crush the pencil lead and sprinkle it into the groove to play a good lubrication role and prolong the service life of the service life of the aluminum doors and windows.